Assembly Properties
|
Thickness - Displays overall
slab thickness.
|
Preview
|
Displays the selected catalog item in the preview
window. This displays changes and the preview updates as various options are
chosen. The preview also changes dynamically with some of the prominent
settings on the Placement tab, e.g Height ,Rotation angle, etc. A right-click
in the Preview opens a
SHOW/HIDE Viewing Tools options menu:
-
Zoom In - Zooms in about center of
preview.
-
Zoom Out - Zooms out about center of
preview.
-
Pan - Moves the preview following the
pointer. Click again to stop panning.
-
Fit - Fits the object to the extents of
the preview.
-
Rotation - Sets the orientation of the
selected item in the preview to one of the standard orientation options:
- Isometric
- Right
Isometric
- Top
- Bottom
- Left
- Right
- Front
- Rear
-
Display Mode - Sets the display of the
selected item in the preview to one of the standard display modes.
- Solid
- Wire
Frame
- Visible Edge
- Filled Visible
Edge
For
Place workflow, the
Hide/Show Preview controls displaying
preview of the element currently selected for placement.
|
Add Layer
|
Adds a new layer to the slab.
Note: While adding a
new layer, selecting the
Material field is mandatory.
|
Delete
|
Deletes the selected layer.
|
Move Layer Up
|
Moves the selected layer up one position in the
hierarchy.
|
Move Layer Down
|
Moves the selected layer down one position in the
hierarchy.
|
Material
|
It is the material related to layers. Double
clicking with left-handed mouse button opens the list of material from which
the material can be selected.
- Family - Sets
the Active Family field. If there is no active family selected, the field is
blank.
- Part - Sets the
Active Part field. If there is no active part selected, the field is blank.
|
Thickness
|
Sets the slab thickness.
|
Core
|
It selects the core layer of compound slab.
|
Edge Setback
|
Offset is extruded from the edge of the side area.
Double clicking with left-handed mouse button switches from display to edit
mode.
|
Infill Edge
|
Used to indicate from which edge it should be
applied to the other layer edge.
Note: To enable the
Infill Edge, selecting the
Edge Material is mandatory.
|
Edge Material
|
It is a additional material related to edge length.
Enabled only after selecting
Infill Edge. Double clicking with
left-handed mouse button opens the list of edge material from which the edge
material can be selected.
- Family - Sets
the Active Family field. If there is no active family selected, the field is
blank.
- Part - Sets the
Active Part field. If there is no active part selected, the field is blank.
|
OK
|
Adds the new layer with its defined properties,
saves the changes and closes the dialog.
|
Cancel
|
Closes the
Compound Slab Editor dialog box
without saving any changes.
|